BRIAN BOONE'S GOT SOLAR

I just want to stop and thank all of you who Purchase products on my blog, Thank-You !! thanks for visiting, and share with others. Hope each and everyone of you is having a Awesome Summer!! and as always :                  SEE YOU DOWN THE ROAD!!

  GOOD  EVENING  EVERYONE !!   Hope everyone is Happy & healthy today! We did this install at Indiana Dunes National Park on July 28th.  This is the William's Install on a Motor Home Here we have (3) 160 watt solar panels on tilt mounts. These panels were placed in the middle so as to be able to add future panels on the drivers side flat mounted. Junction Box. Each panel is wired individually on #8 wire . #6 wire was used from box to controller and to batteries. This install was unique as the controller is 5 ft. below box in closet & batteries are 3 ft. below controller. This is a Renogy (Tracer) 30 amp Controller With a Solar Array Disconnect Switch. We are off to Port Huron, Michigan for our next install, SEE  YOU  DOWN  THE  ROAD !!

          GOOD EVENING EVERYONE !! We are in Hesperia, Michigan! At the Boone's Residence for our install July 15th. It sure was nice camping way out in the country. Thank You for your gracious Hospitality!! This here is the T-Fuse installed 400 Amp for the 2800 Magnum Pure Sine Inverter Installed Also the 50 Amp Resettable Circuit Breaker for the Solar System Installed (4) 160 watt Solar Panels on Tilt Mounts. If Boondocking in the South during the winter months (Nov.- March) it is advisable to tilt panels. 30% can be lost in output during these months when the sun is low in the sky if mounted flat. But only get on roof if you are able!! Here are the Remotes: IPN Pro Remote (solar) & Magnum Remote (inverter) This is the Junction Box (weatherproof) Each Panel is on its own wire (#8) wired to the Junction Box Larger wire (#4) goes from box to controller and to batteries. This here is the Shunt that is required with the Pro Remote for